Home > Shop by Type > ECU Calibrations >

OEM+ ECU Calibration
Veloster N ECU calibration


 
Our Price: $365.00

Price with Selected Options: $365.00


Product Code: 14-03-800

Calibration Level


Calibration Delivery


Add Spark Plugs


Year


Select Vehicle


Select Trim



Qty:  
Description
 

OEM+ ECU Calibrations are designed for your stock or lightly modified 2019+ Hyundai Veloster N (US/Canada/Australia vehicles only at this time). Before performing a calibration on your car, we suggest prepping the engine with a few options to ensure it can handle the increase in power. Each suggestion is linked at the bottom in the Accessories Section.


The ECU Calibration is guaranteed to get you a great increase over stock power levels (individual results may vary), as well as the following improvements:

  • Better throttle response
  • More power under the entire power curve (see dyno sheets)
  • No effects to gas mileage (as long as you can keep it civil!)
  • Pairs well with additional upgrades through available limiter overhead

How do we do this?

  • Air/Fuel Ratio adjustments
  • Engine Load Map adjustments
  • Throttle control maps adjusted
  • Torque/Load limiters adjusted for power
  • Slight increase in boost pressure
  • All factory safety limiters retained

Do I need anything on my car for this tune besides my current modifications?

  • For the OEM+ Conservative Calibration, we can apply these changes to a completely stock or lightly modified car. There are no other hard part requirements but we do recommend installing Oil Catch Cans and colder spark plugs from HKS.
  • For the OEM+ Advanced Calibration, we can also apply these changes to a completely stock or lightly modified car. To maintain your engine's lifespan and the quality of your calibration, we HIGHLY recommend installing Oil Catch Cans and colder spark plugs from HKS as well as a Short Ram Intake (coming soon).

Your vehicle must be in good, working condition. We reserve the right to cancel or adjust the timeframe for any customer with a vehicle not in such condition. We may ask prior to scheduling for proof of condition. We cannot and will not calibrate a vehicle that does not run well. There is no "calibrating around it". We will not make suggestions for repairs if it does not run well prior to calibrating. You will need to consult a local shop for repairs.




Please select your preferred method of calibration below and carefully read the details inside:

  1. Fill out the form that follows your purchase to enter yourself into our Calibrations Database.
  2. We'll email you a shipping label to send your ECU to us. Please be sure to package your ECU very carefully. It is a delicate component of your vehicle that should be well-protected.
  3. We then flash the calibration directly to your ECU on our bench and then send it right back to you. Most are flashed within 3 days of receiving.



  1. Fill out the form that follows your purchase to enter yourself into our Calibrations Database.
  2. Email ecmdev@sxthelement.com with the Subject line "(Your Name) - (Order Number)".
  3. Schedule a time and date to come up to the shop so we can put a personal touch on it.




OEM+ Conservative Calibration

Designed for stock or lightly modded setups. We make the car how it should have came from the factory! Gains are up 10-15 wheel HP with these settings. Along with the gains, we smooth the torque curve for more consistent acceleration all while maintaining conservative boost levels on the stock turbo.

OEM+ Advanced Calibration

Designed for stock or lightly modded setups. We push the car a little more than the Conservative Calibration. Gains are up 30-40 wheel HP with these settings. Along with the gains, we smooth the torque curve for more consistent acceleration all while maintaining conservative boost levels on the stock turbo.


Share your knowledge of this product. Be the first to write a review »